RESOLUÇÃO DE PROBLEMA XRAY-.... T2 2008

Assunto: RESOLUÇÃO DE PROBLEMA XRAY-.... T2 2008 Seg Fev 04, 2008 9:23 pm

To solve the problems with the belts on the T2'008 EU Version we have just
finished the new moulds of front 34T Solid Axle and we
are packaging and sending for FREE set of replacement pulleys for every
T2'008 EU kit, both 5- and 6-cell version.
This new pulley set allows the customer to achieve the very low ratio which
is required for the new stock brushless racing as well
will solve any problems with wearing belts.

The set of pulleys include:
- 1pcs rear ball diff 34T pulley
- 1pcs front composite solid axle 34T pulley
- 2pcs central 20T pulleys

The customer can easily exchange all pulleys on his current car using all
remaining parts from the car. This means no extra parts
are not required. The belts to be used are exactly same as included in the
car. Using this set of pulleys will change the internal
ratio of the car to the 1.7 (as used in all previous versions of T2 cars).

We would like once again remind several important rules when the customers
will at the T2'008 EU kits use the standard 38/16T
pulleys (2.135 internal ratio):

- the belts need to be correctly tighten, the belts can not be overtighten
but also not too loose
- more frequent servicing and inspection of the belts must be used as the
38/16T pulleys require higher and more precise attention
- small set screw M3x2.5 from the last aid bag has to be used to ensure that
the set screw does not protrude from the pinion gear
and does not touch the belt